Hello
it seems that it is not possible for an audi dealer to connect to the OBD socket for reading error code.
ktm would change 2 pin in the plug.
After many research on internet I found this
http://www.race-technology.com…ex.php/ECUType/KMSKTMXBow
ktm x-bow obd connector :
- Pin 3 CAN HIGH
- Pin 11 CAN LOW
Audi connector :
Pin 2 - J1850 Bus+
Pin 4 - Chassis Ground
Pin 5 - Signal Ground
Pin 6 - CAN High (J-2284)
Pin 7 - ISO 9141-2 K Line
Pin 10 - J1850 Bus
Pin 14 - CAN Low (J-2284)
Pin 15 - ISO 9141-2 L Line
Pin 16 - Battery Power
Maybe we can buy an obd cable and change the pin 6 to pin 2 and the pin 11 to pin 14
and after that we can ecu every obd software to read and reset error code