Beiträge von mattkawa
-
-
Bar-tek for me
-
I'm interested if there is a modification possible with the vcds...
-
Here is my crutch made from a mason trestle
-
It's a BWA engine, clubsport 2011.
i've tested with Torque and a wifi odb. It's work very fine with my Audi A6 and my Golf, but impossible with the Xbow... -
i have tested to switch pin 3 -> 6 and pin 11 -> 14
so pin 3 and 11 is emptybut it doesn't work...
-
without seeing your post, I did exactly the same system last night